![]() If the engine's tilt tube is especially rusty or dirty inside, buy a tilt tube cleaning brush (available at your local marine dealer or search "steering tube cleaning brush" online).Tighten the tube attachment nut and reinstall the steering arm nut. Apply a thin coating of grease to both the outside and inside of the cable, then reinstall it into the engine tilt tube. Steer the cable all the way out until fully extended and remove all grease and dirt from the inner sleeve of the cable as well. ![]() Remove all the old grease from the cable ram end. Pull the cable out from the engine's tilt tube. Remove the cable from the engine by removing the steering arm nut and the large cable nut that attaches the cable to the outboard. Avoid using too much, as globs of grease will harden over time and cause stiffness and binding. Apply a light application of waterproof marine grease annually.Proper maintenance consists of the following: Cable systems work well and when installed and maintained properly, they can last for decades.
0 Comments
Leave a Reply. |